The GSE system is the leading in-roof mounting kit suitable for installing modules in portait and landscape. It is available with a range of frame and clamps sizes supporting the vast majority of modules on the market.

The GSE system is suitable for tile, pantile and slate roofs allowing you to use the same system for all your projects. The kit benefits from a simple interlocking design which means it is quick and easy for you to install.

Product	Image	Sizes Available	Function
Portrait Frame		1640-80/992 1640-80/1001 1580/808 1559/1046	The GSE frame is fixed onto the battens and supports the module. The frames interlock for easy installation. As air-flow is important for performance the frame includes a rectangular hole in the middle. The space even allows you to install modules with micro-inveters.
Landscape Frame		1640/992 1640/1001 1580/808 1559/1046	Frames are also available to mount your panels in landscape.
Frame Screw			Six screws are used to fix each frame to the battens

Flashings

The flashing pieces are used to help waterproof the GSE array.

1. The Lateral flashings are fitted along the sides of the GSE array
2. The 'Top left' and 'Top right' flashings are positioned at the top corners of the array joining the Lateral flashings to the Top flashings
3. The Top flashings are joined together using the 'Junction' pieces
4. A 'Corner piece' bar is fixed under each Top flashing using the 'Pop rivets'
5. The 'Corner piece' lifts the Top flashing to the required height
6. The Lateral flashings and Top flashings are fixed to the battens using the Flashing Hooks

Product	Image	Dimensions
Top Flashing		150 x 26 cm
Top Left Flashing
Top Right Flashing
Lateral Flashing		118 x 15 cm
Junction for top flashing
Coner Piece (for top flashing)		140cm
Pop Rivet
Flashing Hook

Clamps

The clamps are used to fix the modules down to the GSE frames. Each module is secured at the four fixing points on the long sides.

Product	Image	Function
Double Clamp		Double clamps fix the sides of two adjacent panels.
Single Clamp		Simple clamps fix the side of the panel at the end of the row.
Right and Left wedges		The Right and Left Wedges are installed under the Simple clamps for more strength.

Waterproofing materials 

The seal, Wakaflex and optional roof underlay ensure the waterproofing of the GSE system.

Product	Image	Function
Pre-compressed seal		The pre-compressed seal runs around the Lateral flashings and Top flashings to help with waterproofing
Wakaflex flashing		A strip of Wakaflex is used to waterproof the base of the GSE array
Roof Underlay		Depending on the roof type an underlay may be required.