Victron MultiPlus Inverter/Charger 48V/3000/35A-16 230V

Or Register

Victron Energy - MultiPlus Inverter/Charger

The MultiPlus unit is a battery charger which offers self-consumption and back-up power. It is suitable for off-grid solar battery systems.

The MultiPlus unit has one AC input which is usually used to connect a back-up diesel generator. The unit has an AC output where the PV inverters and AC loads are conected. Some models also have an auxiliary AC output which can be used for a programmable load such as an immersion.

Three MultiPlus units can be connected in 3 phase configuration and several units can be installed in parallel for larger commercial systems.

The MultiPlus inverter/charger is suitable for use with lead-acid batteries, it can also charge Li-ion batteries if installed with a Battery Management System.

Design note: if you are designing a system which requires two AC power sources (for example both a grid connection and a back-up diesel generator) then the Quattro unit would be more suitable.

Inverter AC Output
Operating Phase Single Phase
Nominal output power (W) 3000
Inverter Physical Spec
Inverter Weight (Kg) 18
Inverter Width (mm) 258
Inverter Height (mm) 362
Inverter Depth (mm) 218
Inverter IP Rating 21
Inverter Additional Features
Built-in Wi-Fi No
Battery Charger
Nominal battery voltage 48
Battery Types Lead-acid, Li-ion (requires BMS)
Battery Voltage Range 38-66
Max Charge Current 35
Victron Energy
Cont output power @ 25°C (VA) 3000
Cont output power @ 25°C (W) 2500
Cont output power @ 40°C (W) 2200
Peak power (W) 6000 (up to 30s)
Auxiliary output (A) 16
Programmable relays 1
COM ports (general purpose) n/a
Battery connection 4 x M8 bolts
230V AC connection 6AWG screw terminals
Transfer switch (A) 16